HIGH PERFORMANCE FLEXIBLE CEMENTITIOUS ADHESIVE, SIKACERAM 205 T
SikaCeram 205 T is a high perfomance flexible cementitious tile adhesive can be used for bonding ceramic tiles in interior and exterior. It's classified C2T.
USES
- Can be used for bonding ceramic tiles in a continuous thin layer, up to 5 mm
- Suitable to bond the following types of high and low absorption tiles
- Can be used on substrates
- Can be used on walls and on floors, in exterior or interior situations
ADVANTAGES
- CE Classified C2T
- High flexibility, so it is suitable for use on facades
- Can be used with underfloor heating
- Water and weather resistant
- Easy to use with excellent workability and thixotropic consistency
- Grey powder
APPLICATION
Sika Ceram-205 T is applied using a notched trowel. Choose the trowel that will give the right coverage to the back of the tile.
As a guide:
- For mosaics up to 5 x 5 cm, use a 3 mm notched trowel
- For normal ceramic tiles (less than 200 x 200), use a 6 mm notched trowel
- For large tiles, use a 9 mm notched trowel.
- For tiles larger than 300 x 300, or for highest performance requirements (tiles to be polished, heavy loads, poolside application etc.), the back-butteringtechnique for bedding must be used
Apply a uniform layer of Sika Ceram-205 T by trowel in smallareas at the recommended thickness. Then, immediately, adjust the thickness if necessary using a notched trowel. Finally, place the ceramic tile, pressing it firmly onto the adhesive.
