Grey powder
HIGH PERFORMANCE FLEXIBLE CEMENTITIOUS ADHESIVE, SIKACERAM 205 T
Marketplace • sika posted the article • 0 comments • 1262 views • 2018-11-09 23:59
SikaCeram 205 T is a high perfomance flexible cementitious tile adhesive can be used for bonding ceramic tiles in interior and exterior. It's classified C2T.
USES
Can be used for bonding ceramic tiles in a continuous thin layer, up to 5 mmSuitable to bond the following types of high and low absorption tilesCan be used on substratesCan be used on walls and on floors, in exterior or interior situations
ADVANTAGES
CE Classified C2THigh flexibility, so it is suitable for use on facadesCan be used with underfloor heatingWater and weather resistantEasy to use with excellent workability and thixotropic consistencyGrey powder
APPLICATION
Sika Ceram-205 T is applied using a notched trowel. Choose the trowel that will give the right coverage to the back of the tile.
As a guide:
For mosaics up to 5 x 5 cm, use a 3 mm notched trowelFor normal ceramic tiles (less than 200 x 200), use a 6 mm notched trowelFor large tiles, use a 9 mm notched trowel.For tiles larger than 300 x 300, or for highest performance requirements (tiles to be polished, heavy loads, poolside application etc.), the back-butteringtechnique for bedding must be used
Apply a uniform layer of Sika Ceram-205 T by trowel in smallareas at the recommended thickness. Then, immediately, adjust the thickness if necessary using a notched trowel. Finally, place the ceramic tile, pressing it firmly onto the adhesive.
view all
SikaCeram 205 T is a high perfomance flexible cementitious tile adhesive can be used for bonding ceramic tiles in interior and exterior. It's classified C2T.
USES
- Can be used for bonding ceramic tiles in a continuous thin layer, up to 5 mm
- Suitable to bond the following types of high and low absorption tiles
- Can be used on substrates
- Can be used on walls and on floors, in exterior or interior situations
ADVANTAGES
- CE Classified C2T
- High flexibility, so it is suitable for use on facades
- Can be used with underfloor heating
- Water and weather resistant
- Easy to use with excellent workability and thixotropic consistency
- Grey powder
APPLICATION
Sika Ceram-205 T is applied using a notched trowel. Choose the trowel that will give the right coverage to the back of the tile.
As a guide:
- For mosaics up to 5 x 5 cm, use a 3 mm notched trowel
- For normal ceramic tiles (less than 200 x 200), use a 6 mm notched trowel
- For large tiles, use a 9 mm notched trowel.
- For tiles larger than 300 x 300, or for highest performance requirements (tiles to be polished, heavy loads, poolside application etc.), the back-butteringtechnique for bedding must be used
Apply a uniform layer of Sika Ceram-205 T by trowel in smallareas at the recommended thickness. Then, immediately, adjust the thickness if necessary using a notched trowel. Finally, place the ceramic tile, pressing it firmly onto the adhesive.
HIGH PERFORMANCE FLEXIBLE CEMENTITIOUS ADHESIVE, SIKACERAM 205 T
Marketplace • sika posted the article • 0 comments • 1262 views • 2018-11-09 23:59
SikaCeram 205 T is a high perfomance flexible cementitious tile adhesive can be used for bonding ceramic tiles in interior and exterior. It's classified C2T.
USES
Can be used for bonding ceramic tiles in a continuous thin layer, up to 5 mmSuitable to bond the following types of high and low absorption tilesCan be used on substratesCan be used on walls and on floors, in exterior or interior situations
ADVANTAGES
CE Classified C2THigh flexibility, so it is suitable for use on facadesCan be used with underfloor heatingWater and weather resistantEasy to use with excellent workability and thixotropic consistencyGrey powder
APPLICATION
Sika Ceram-205 T is applied using a notched trowel. Choose the trowel that will give the right coverage to the back of the tile.
As a guide:
For mosaics up to 5 x 5 cm, use a 3 mm notched trowelFor normal ceramic tiles (less than 200 x 200), use a 6 mm notched trowelFor large tiles, use a 9 mm notched trowel.For tiles larger than 300 x 300, or for highest performance requirements (tiles to be polished, heavy loads, poolside application etc.), the back-butteringtechnique for bedding must be used
Apply a uniform layer of Sika Ceram-205 T by trowel in smallareas at the recommended thickness. Then, immediately, adjust the thickness if necessary using a notched trowel. Finally, place the ceramic tile, pressing it firmly onto the adhesive.
view all
SikaCeram 205 T is a high perfomance flexible cementitious tile adhesive can be used for bonding ceramic tiles in interior and exterior. It's classified C2T.
USES
- Can be used for bonding ceramic tiles in a continuous thin layer, up to 5 mm
- Suitable to bond the following types of high and low absorption tiles
- Can be used on substrates
- Can be used on walls and on floors, in exterior or interior situations
ADVANTAGES
- CE Classified C2T
- High flexibility, so it is suitable for use on facades
- Can be used with underfloor heating
- Water and weather resistant
- Easy to use with excellent workability and thixotropic consistency
- Grey powder
APPLICATION
Sika Ceram-205 T is applied using a notched trowel. Choose the trowel that will give the right coverage to the back of the tile.
As a guide:
- For mosaics up to 5 x 5 cm, use a 3 mm notched trowel
- For normal ceramic tiles (less than 200 x 200), use a 6 mm notched trowel
- For large tiles, use a 9 mm notched trowel.
- For tiles larger than 300 x 300, or for highest performance requirements (tiles to be polished, heavy loads, poolside application etc.), the back-butteringtechnique for bedding must be used
Apply a uniform layer of Sika Ceram-205 T by trowel in smallareas at the recommended thickness. Then, immediately, adjust the thickness if necessary using a notched trowel. Finally, place the ceramic tile, pressing it firmly onto the adhesive.